Appendix a – Garmin G1000 Quest Kodiak User Manual

Page 459

Advertising
background image

190-00590-03 Rev. A

Garmin G1000 Pilot’s Guide for the Quest KODIAK 100

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

447

APPENDIX A

GMU 44 Message Advisories

Alerts Window Message

Comments

HDG FAULT – AHRS1 magnetometer
fault has occurred.

A fault has occurred in the #1 GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.

HDG FAULT – AHRS2 magnetometer
fault has occurred.

A fault has occurred in the #2 GMU 44. Heading is flagged as invalid. The AHRS uses
GPS for backup mode operation. The G1000 system should be serviced.

MANIFEST – GMU1 software
mismatch, communication halted.

The GMU 44 has incorrect software installed. The G1000 system should be serviced.

MANIFEST – GMU2 software
mismatch, communication halted.

GDL 69A Message Advisories

Alerts Window Message

Comments

GDL69 CONFIG – GDL 69 config
error. Config service req’d.

GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.

GDL69 FAIL – GDL 69 has failed.

A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced

MANIFEST – GDL software mismatch,
communication halted.

The GDL 69 has incorrect software installed. The G1000 system should be serviced.

GDC 74A Message Advisories

Alerts Window Message

Comments

ADC1 ALT EC – ADC1 altitude error
correction is unavailable.

GDC1 or GDC2 is reporting that the altitude error correction is unavailable.

ADC2 ALT EC – ADC2 altitude error
correction is unavailable.
ADC1 AS EC – ADC1 airspeed error
correction is unavailable.

GDC1 or GDC2 is reporting that the airspeed error correction is unavailable.

ADC2 AS EC – ADC2 airspeed error
correction is unavailable.
MANIFEST – GDC1 software
mismatch, communication halted.

The GDC 74B has incorrect software installed. The G1000 system should be serviced.

MANIFEST – GDC2 software
mismatch, communication halted.

Advertising