Garmin GPS 165 TSO - Manual (Page 10)

viii
INTRODUCTION
Key & Knob Functions C The cursor key is used to activate/deactivate the cursor. The cursor is indi-
cated by flashing characters on the screen and is used for data entry, chang-
ing fields or cycling through available information.
\
The clear key is used to erase information or cancel an entry.
M The message key is used to view receiver messages and to alert you to
important warnings and requirements.
E The enter key is used to approve an operation or complete data entry. It is
also used to confirm information, such as during power on.
O The outer knob is used to advance through pages, advance the cursor or
move through data fields.
K
The inner knob is used to change data or scroll through information that
cannot fit on the screen all at once.
This manual will describe how to enter data using the concentric knobs; K for
the inner knob and O for the outer knob. Experiment with the concentric knobs.
This will greatly reduce the amount of time required to navigate with the GPS 155.
GARMIN is fully committed to your satisfaction as a customer. If you have any
questions regarding the GPS 155, please contact our customer service department at:
GARMIN International, Inc.
9875 Widmer Rd.
Lenexa, KS 66215-1239
(913) 599-1515 (913) 599-2103 (FAX)
Scrolling Arrow Prompts
Whenever the GPS 155 is displaying a list of
information that is too long for the display screen,
the scrolling arrow prompt will indicate which
direction to scroll to view additional listings.
To scroll through a list with the flashing cursor
inactive, simply rotate the inner knob. If the
scrolling cursor is active, use the outer knob to
view additional information.
155man (GOOD) 7/24/98 2:42 PM Page viii