Garmin GPS 165 TSO - Manual (Page 31)

The scheduler function can be used to display reminder messages after a selected
elapsed time such as Change Oil, Switch fuel tanks, etc. The scheduled message will be
displayed after the timer runs out, and each time the GPS 155 is powered up, until the
time is changed or the message is deleted.
To enter a scheduled message:
1. Press
C
and rotate
O
to highlight ‘Scheduler?’. Press
E
.
2. Rotate O to highlight the message you would like to edit (if none exist, you must edit
message 1).
3. Use
K
and
O
to enter the message. Press
E
.
4. Use
K
and
O
to set the elapsed time until the message is displayed, in hours and
minutes, up to 99 hours and 59 minutes. (This time is cumulative and counts whenever the
GPS 155 is on in Normal mode.)
5. Press
E
to accept. To edit another scheduled message, repeat steps 4, 5 and 6, or
press C to finish.
To delete a scheduled message:
1. Press
C
and rotate
O
to highlight ‘Scheduler?’. Press
E
.
2. Rotate
O
to highlight the message you would like to delete.
3. Press \ , followed by E .
21
NAV KEY
NAV MENU 2/Scheduler
The scrolling arrow prompt indicates which direc-
tion to scroll to view additional listings.
Entering a scheduled message.
The scheduled message will appear after the timer
expires and after the GPS 155 is powered up until
it is changed.
155man (GOOD) 7/24/98 1:56 PM Page 21