Garmin GPS 165 TSO - Manual (Page 45)

User Waypoint Information
In addition to the airport, VOR, NDB and intersection waypoints contained in your
NavData® card, the GPS 155 allows you to store up to 1,000 user-defined waypoints.
Once a user waypoint is created, two user waypoint pages will display the following
information:
• Waypoint identifier
• Position in latitude and longitude
• Identifier, range and bearing from a reference waypoint
• User comments
To scroll between the user waypoint position page and the user comments page,
rotate O. User waypoints may be created or modified using the W key. After select-
ing the waypoint identifier, as shown on page 25, you will be prompted to enter infor-
mation if the waypoint is new. There are three ways to create a user waypoint’s position
from the
W key:
1. Enter the exact position of the new waypoint.
2. Reference a known waypoint.
3. Enter a range and bearing from your current position.
To create or edit a user waypoint:
1. Press
W
.
2. Use
O
to highlight the ‘user?’ field. Press
E
.
3. Use K and O to enter the waypoint identifier. Press E .
35
WAYPOINTS & DATABASE
User Waypoint Overview
User Waypoint Comments Page.
User Waypoint Position Page.
Entering a user waypoint name.
155man (GOOD) 7/24/98 1:56 PM Page 35