Garmin GPS 165 TSO - Manual (Page 91)

To delete a SID from the Route Catalog page...
1. Display the desired route on the Route Catalog page.
2. Select ‘sid?’ in the route action field and press E .
3. Rotate O to highlight the active SID (denoted by an asterisk). Press \ , then E .
Standard Terminal Arrival Routes (STARs) used in the GPS 155 are selected and acti-
vated with the same procedures as SIDs. Available STARs may be selected at any time for
the active route as long as the arrival airport is the last active route waypoint or direct-to
waypoint. Activating a STAR will modify the sequence of waypoints in Route 0. If you’d
like to save the contents of Route 0, be sure to copy it to an empty route first.
To select and activate a STAR:
1. Press
R
and rotate
O
until the STAR select page appears.
3. Press
C
and rotate
O
until the desired STAR flashes.
4. Press E . The STAR waypoints will be inserted in the route.
If a STAR has more than one transition or runway, the STAR select page will
display the transitions and/or runway designations available.
To select a transition:
1. Rotate
O
until the desired transition flashes and press
E
.
To select a runway:
1. Rotate
O
until the runway designation flashes and press
E
.
81
APPROACH NAVIGATION
Selecting & Activating STARs
Selecting a STAR transition.
Selecting a STAR.
155man (GOOD) 7/24/98 1:57 PM Page 81