Garmin GPS 165 TSO - Manual (Page 63)

Once a route is defined through the route catalog page, it may be activated or
inverted (to navigate the route waypoints in reverse order) from the route catalog
page. Activating or inverting a route copies the selected route into route 0 and over-
writes the existing active route.
To activate a route:
1. Press
R
and use
O
to display the route catalog page.
2. Rotate
K
to display the route you would like to activate.
3. Press C and use K to display ‘activate?’. Press E .
After travelling a route or creating a route with the GPS 155’s AutoStore TM feature,
the route activation field may be used to activate the route in reverse order.
To activate a route in reverse order:
1. Use
K
to display the route number you would like to reverse.
2. Press C and use K to display ‘reverse?’. Press E .
This will copy the reversed route to route 0 and display the active route page. The
original route will remain intact in its original storage position.
The route action field also features a copy function that permits you to copy any
route to another empty storage route. The copy function can be used to save the con-
tents of the active route (Route 0) to a storage route before activating another route or
turning the GPS 155 off.
53
DIRECT-TO & ROUTE NAV
Adding & Deleting Route Wpts
Copying a route.
To invert the active route, select ‘reverse?’ from
the route action field.
155man (GOOD) 7/24/98 1:56 PM Page 53