Garmin GPSMAP 295 - Manual (Page 103)

93
Airspace Ahead, Within 10 Min: Your projected course will place you in special
use/controlled airspace with in ten minutes.
Airspace Near and Ahead: Your current position is within two nautical miles of an
airspace boundary and you are projected to enter the airspace, based on your current
ground track and ground speed.
Alarm Clock: The alarm clock time set from the alarms submenu has been reached.
Antenna Shorted To Ground: Check antenna wiring or antenna placement.
Approaching: You are one minute away from reaching the specified destination
waypoint.
Approaching VNAV Profile: You are within one minute of reaching the initial
VNAV descent point.
Arriving At: You are within the arrival alarm circle of the indicated waypoint.
Battery Voltage Low: The batteries are low and should be replaced.
Beacon Comm Failed: Communication with the beacon signal has been interrupted.
Basemap Failed: The unit’s basemap has failed. Return your unit to GARMIN for
service.
Cant Navigate Locked Rte: You have attempted to navigate a route with a locked
waypoint. A waypoint can be locked when the database is updated if the waypoint
does not exist in the new database.
Data Card Required: You have accessed a unit feature which requires an optional
data card and MapSource data.
Messages
Data Transfer Complete: Transfer of data to the unit, for database update or using
the PC software, has been completed.
Database Error: A user waypoint failed to store in memory. If the problem persists,
return to GARMIN for service.
Duplicate Route ID: The route name you have selected is already in use for
another route.
Duplicate Waypoint ID: The waypoint name you have selected is already in use
for another user waypoint.
Favorites List Is Full: There is no more room in the Favorite Waypoints list. Delete
unwanted waypoints before adding new waypoints.
Invalid Waypoint: A waypoint was received during upload transfer that has an
invalid indentifier.
Leg Not Smoothed: The upcoming route leg is too short for smooth waypoint
transitions.
Lost Satellite Reception: The unit has lost satellite signals. Check antenna
connections or try moving it to a location with a clear view of the sky.
Memory RAM Failed: The unit has detected a failure in its internal memory. If this
message persists the unit is unusable. Return to GARMIN for service.
Memory ROM Failed: The unit has detected a failure in its permanent memory. If
this message occurs the unit is unusable. Return to GARMIN for service.
Near Airspace, within 2 nm: Your current position is within two nautical miles of
an airspace boundary, but you are not projected to enter the airspace.
Appendix D