Garmin GPSMAP 295 - Manual (Page 64)

54
WPT ADDRESS— allows you to search for a particular address within the optional MapSource data.
To search for specific address and/or select an address as your destination:
1. Press D WPT to display the waypoint information pages.
2. Use the ROCKER KEYPAD to select the ‘ADDRESS’ file tab at the top of the page.
3. Press the DOWN portion of the ROCKER KEYPAD to highlight the address number field and press
ENTER.
4. Use the ROCKER KEYPAD to enter the address
number—UP/DOWN to select the highlighted
character and RIGHT to move to the next
character field—and press ENTER once the
entire number has been entered.
5. Press ENTER and use the ROCKER KEYPAD to
enter the street name. As you enter the first few
characters of the street name, the GPSMAP 295
will show the first available entry in the
MapSource data. Once the desired street name is
displayed, press ENTER.
6. Use the ROCKER KEYPAD to scan through
additional entries in the street name list and
press ENTER once the desired street name is
highlighted.
7. To further narrow the search, you may enter a city and postal code. These entries are not required
to search the MapSource data. Follow steps 5 and 6 to enter city and postal, if desired.
8. Use the ROCKER KEYPAD to highlight the on-screen ‘Search’ button and press ENTER. The
GPSMAP 295 will search all entries in the MapSource data, showing any matches. If there are
multiple matches, use the ROCKER KEYPAD and ENTER key to view each item.
9. To select the address as your destination, verify that the on-screen ‘GOTO’ button is highlighted
and press ENTER.
With the optional MapSource data, you can also search for
specific addresses and specify the address as your
destination...
...once you enter the street number and street name, select
the on-screen ‘Search’ button and the GPSMAP 295 will
search through all entries in the MapSource data—
displaying any matches it finds.
Address Search