Garmin GPSMAP 295 - Manual (Page 75)

65
ROUTE Pressing the GPSMAP 295’s ROUTE key will display a Route List. The Route List lists the names of
any routes currently stored in memory, the available and used route memory, and provides on-screen
buttons to create a ‘New Route’ and ‘Delete All’ routes.
To display the Route List, press the ROUTE key.
To create a new route:
1. With the Route List displayed, use the ROCKER KEYPAD to select the on-screen ‘New Route’
button and press ENTER. The Route Plan Page will appear with a blank line for the first route
waypoint.
2. Press ENTER to begin selection of the first route waypoint.
3. The waypoint information pages will appear. Use the ROCKER KEYPAD to select the desired field
and press ENTER. For example, airports can be selected from the identifier, facility name or city field.
4. Use the ROCKER KEYPAD to select the waypoint—UP/DOWN to select the highlighted character
and RIGHT to move to the next character field—and press ENTER once all characters for the
identifier/facility name/city have been entered. Press ENTER again to return to the Route Plan Page.
5. Highlight the next blank line and repeat steps 2 through 4 to enter each additional route waypoint.
As you add waypoints to the route, the route name (appearing at the top left corner of the Route
Plan Page) is updated to include the first and last waypoints in the route.
6. To return to the Route List, press QUIT.
Route List
The Route List displays the name(s) of any user-created
routes stored in memory. To create a new route, select the
on-screen ‘New Route’ button and press ENTER...
...the Route Plan Page will appear with a blank line for the
first route waypoint. Use ENTER and the ROCKER
KEYPAD to select each waypoint for the route.
Route Name(s) Available/Used
Route Memeory
On-screen Buttons
Currently Active Route