Garmin GPSMAP 295 - Manual (Page 70)

60
NRST
To view database information for a nearby waypoint,
highlight the desired waypoint on the list and press ENTER.
To select a nearby waypoint as your destination, highlight
the waypoint on the list, press D WPT and then press
ENTER.
Using Nearest Pages
While panning on the Map Page (see page 16), pressing NRST will display a list of
cities, highway exits and points of interest nearest to the map pointer’s location - NOT
your present position. The list of nearest airports and navaids is ALWAYS relative to
your present position.
To view the Nearest Pages:
1. Press the NRST key.
2. To select a different category, use the ROCKER KEYPAD to select the desired file tab along the top
of the page.
The nearest airports are displayed by selecting the leftmost tab at the top of the page,
titled ‘AIRPORT’. When an airspace alert is provided, pressing NRST will automatically
display nearest airspace information. Press NRST a second time to quickly display the
nearest airports list.
Additional information for airports, navaids, user waypoints, cities, highway exits and points of
interest are available from the waypoint information pages, described on pages 38 through 53.
To view additional information for a nearby waypoint:
1. Display the nearest pages and select the desired file tab as described above.
2. Use the ROCKER KEYPAD to highlight the desired waypoint on the list and press ENTER. The
corresponding waypoint information page will appear, showing additional waypoint information.
3. For airports, use the ROCKER KEYPAD to select the file tabs across the top of the waypoint
information pages and display the desired airport data.
4. Highlight the on-screen ‘OK’ button and press ENTER to return to the Nearest Pages.
In an emergency, a few simple keystrokes can be used to guide you to the closest point to set down.
To select a nearby waypoint as your destination:
1. Display the nearest pages and select the desired file tab as described above.
2. Use the ROCKER KEYPAD to highlight the desired waypoint, press D WPT, then press ENTER.
1
.