Garmin GPSMAP 295 - Manual (Page 42)

32
Main Pages
The last page appearing in the main sequence is the Active Route Page. Whenever you have
activated a route, GOTO or TracBack, the Active Route Page will show each waypoint (by name) of the
active route, along with desired course, distance and time enroute (default selections). As you navigate
the route, the information on the Active Route Page will automatically update to indicate the current
destination waypoint, any remaining interim waypoints and the final destination waypoint.
The three data field columns following the route waypoint names are user-selectable to display the
information you desire. There are ten different data items available: desired Course, Distance to next
waypoint, ETA or ETE to Next waypoint, Fuel requirements, Leg Distance, Leg Fuel requirements, Leg
Time, Sunrise and Sunset times.
From the Active Route Page, you can change the name of the active route, review information on a
route waypoint, edit the route, or bypass route waypoints and GOTO any waypoint in the route.
To change the name of the active route:
1. With the Active Route Page displayed, use the ROCKER KEYPAD to highlight the active route
name field, in the top left corner of the page, and press ENTER.
2. Use the ROCKER KEYPAD to enter the desired route name. Use the UP/DOWN portion to select
the desired character and RIGHT to move to the next character field.
3. Press ENTER once you have entered all characters for the desired route name.
Current Speed
and Track
‘ACTIVE ROUTE’ (or GOTO/
APPROACH/TRACBACK)
and Route Name Field
GOTO or Route Waypoint
Names (Current destination
denoted by arrow)
Desired Course,
Distance and Time To
each route waypoint
When a GOTO destination is selected, only one waypoint
will appear on the Active Route Page—with a ‘GOTO’
arrow beside the waypoint name.
To rename the active route, highlight the route name field,
press ENTER and use the ROCKER KEYPAD to select a
new name.
Active Route Page