Dell OptiPlex GX240 - Manual (Page 77)

I n s t a l l i n g U p g r a d e s 75
E x p a n s i o n - C a r d C o n n e c t i o n
10 Before lowering the retention arm, make sure of the following:
• Tops of all expansion cards and filler brackets are flush with the
alignment bar.
• Notch in the top of the card or filler bracket fits around the alignment
guide.
Press the arm into place, securing the expansion card(s) in the
computer.
1 bracket within slot
2 bracket caught outside of slot
3 fully seated card
4 not fully seated card
3
4
2
1