Dell XPS 210 - Manual (Page 19)

4. Carefully, lift the drive away from the computer.
5. Disconnect the floppy drive interface cable from the system board (see System Board Components ).
Installing a Floppy Drive
1. Follow the procedures in Before You Begin .
2. Remove the CD/DVD drive, if installed (see Removing a CD/DVD Drive ).
3. Gently slide the floppy drive into place until you hear a click or feel the drive securely installed.
1 drive release latch 2 floppy drive
NOTE: The interface cable is held in place by the metal drive bracket and does not need to be removed from the drive.
1 cable release tab 2 interface cable edge connector 3 interface cable
NOTE: If the replacement or new floppy drive does not have the shoulder screws, use the screws in the drive panel insert.