Dell XPS 210 - Manual (Page 21)

1. Follow the procedures in Before You Begin .
2. Remove the CD/DVD drive, if installed (see Removing a CD/DVD Drive ).
3. Remove the hard drive (see Removing a Hard Drive ).
4. Disconnect the interface cable from the back of the Media Card Reader and from the Media Card Reader connector on the system board (see System
Board Components ).
5. Pull up on the drive release latch and slide the Media Card Reader towards the back of the computer, then lift to remove the drive from the computer.
Installing a Media Card Reader
1. Follow the procedures in Before You Begin .
2. Remove the Media Card Reader from its packaging and ensure that all the screws are included.
1 interface cable 2 Media Card Reader connector
1 drive release latch 2 Media Card Reader
NOTE: If necessary, remove the Media Card Reader screws.