AASTRA 7433ip for MX-ONE User Guide EN - Manual (Page 80)

6/1553-DBC 433 01 Uen D 2012-02-22 80
O THER U SEFUL F EATURES
12.2.2.4 Unlocking an Extension
To unlock an extension with an individual authorization code, do the
following:
1) Dial #76* authorization code #.
2) When you hear a verification tone and the lock icon disappears
from the display, the extension is unlocked
12.2.2.5 Changing the Authorization Code
The individual authorization code can be changed from your own phone.
To change the individual authorization code for an extension, do the
following:
1) Dial *74* previous authorization code * new authorization code #.
2) When you hear a verification tone, the individual authorization code
has been changed.
Note: The authorization code will be changed only if the previous autho-
rization code is valid.
12.3 Alarm Extension
An alarm extension is assigned characteristics similar to an alarm
centre. All calls to such an extension are automatically granted intrusion
access if the extension is busy. Up to seven callers can be connected to
the alarm extension at the same time.
An alarm extension cannot be assigned to an IP phone, but it is possible
to call an alarm extension from an IP phone.
12.4 Direct In-dialing
Direct In-dialing is a feature that enables direct routing of incoming
external calls to predefined extensions or groups. Usually, the exchange
has a direct in-dialing feature, enabling external subscribers to call you
directly without having to go through the operator.
Note: A call that is not serviced by a predefined extension can be
rerouted to an operator or an alternate answering position.