AASTRA DT4x2 for MX-ONE User Guide EN - Manual (Page 101)

101 DT412/DT422/DT432
Settings
Activate a function or number with a preprogrammed
Soft key or a preprogrammed Hot key
Absent Press the preprogrammed Soft key (see display),
The pre-set function will be activated, in this example Absent.
or å
press and hold the preprogrammed Hot key.
A number between 0 and 9. The pre-set function will be activated.
Available functions
Data send - See section “ Send mobile data ” on page 81.
Data with prefix - See section “ Send mobile data ” on page 81.
Phone call - You program a key with a name and a number.
Short-cut - A short cut to any of the following functions:
•
Absent - See section “ Absent ” on page 79.
• Local phonebook - See section “ Phonebook ” on page 50.
• Central phonebook - See section “ Phonebook ” on page 50.
• Services - See section “ Services ” on page 96.
• Switch off - See section “ Switching On/Off ” on page 29.
• No-movement Alarm *
• Man-down Alarm *
• Edit alarm data *
• Change system - See section “ Change system ” on page 110.
• Demo Mess 1
• Demo Mess 2
• RSSI
* Only available for the DT422 and DT432 phones. See section
“ Alarm ” on page 91.
SMS - See section “ SMS (Short Message Service) ” on page 80.
Change mode - See section “ Change modes ” on page 95.
Not used - If you do not need a function or a phone number any
longer, you can set the key to Not used.