System a, No system, No access – AASTRA DT4x2 for MX-ONE User Guide EN User Manual

Page 18

Advertising
background image

Description

DT412/DT422/DT432

18

System connection messages

System A

System indication

The phone is in contact with System A. It is also possible for the

system to be named something else, e.g. MD110.

No system

Out of coverage

The phone is not in contact with any system. Please ask your

system administrator to log on the phone.

Note: When re-entering the coverage area it can take a

couple of minutes before the phone automatically has

registered into the system.

It is also possible to get an out of coverage warning signal,

contact your system administrator if you require this.

No access

Access indication

Your phone has contact with a system, calling is not allowed.

Display icons

Call / Off-hook

Appears when your phone is off-hook and flashes during ringing.

Audio signal off

Shown when all alert signals, including ring signal, message tone,

key beep etc. are turned off. High priority messages will however

override this setting. See section “

Audible Adjustments

” on

page 112.

Battery

Always shown in the display in idle mode. When the level is low it is

time to charge the battery. See section “

Installation

” on page 116.

Loudspeaking (handsfree)

Shown when the loudspeaker is activated and the phone is in

Loudspeaking operation (handsfree). See section “

During Calls

” on

page 57.

New message

Appears when a new message is received. The number on the

right side of the icon shows the total number of unread messages.

The symbol will remain until the message is marked as read. See

section “

Messages

” on page 75.

Note: For voice messages the New message icon is only

an indication of received voice messages, the number does

not reflect the actual number of unread messages.

3

Advertising