AASTRA 6735i User Guide EN - Manual (Page 112)

Line Keys, Programmable Keys, and Softkeys
105
41-001451-00 REV01 – 06.2013
Configuring a Directory Key
Use the following procedure to configure a Directory key on the 6735i IP Phone. The procedure shows the programma-
ble key screen as an example.
Aastra Web UI
Note:
By default, the Directory key is Key 2 on the Programmable keys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Directory.
4. In the "Label" field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Programmable Keys
6. Select from "Key 1" through "Key 6".
7. In the "Type" field, select Directory.
Expansion Module Keys
8. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
9. In the "Type" field, select Directory.
10. (M675i) In the "Label" field, enter a label to apply to this key.
11. Click Save Settings.