AASTRA 6735i User Guide EN - Manual (Page 114)

Line Keys, Programmable Keys, and Softkeys
107
41-001451-00 REV01 – 06.2013
Configuring a Callers List Key
Use the following procedure to configure a Callers List key on the 6735i IP Phone. The procedure shows the programma-
ble key screen as an example.
Aastra Web UI
Note:
By default, the Callers List key is Key 3 on the Programmable keys.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Callers List.
4. In the "Label" field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Programmable Keys
6. Select from "Key 1" through "Key 6".
7. In the "Type" field, select Callers List.
Expansion Module Keys
8. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
9. In the "Type" field, select Callers List.
10. (M675i) In the "Label" field, enter a label to apply to this key.
11. Click Save Settings.