AASTRA 6735i User Guide EN - Manual (Page 135)

Handling Calls
41-001451-00 REV01 – 06.2013
128
Using Local Conferencing in Live Dial Mode
Use the following procedure to create a conference call using local conferencing in live dial mode.
4. Press the Conf key. You will not hear a dial tone before the dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are able to edit the destination number (“Backspace” softkey is provided and navigation key is functional to
move the cursor to the desired location).
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf key. You should hear a dial tone before dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are not able to edit the destination number as the phone will either match the inputted number to a dial plan
or wait for the set digit timeout.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
L1 John Doe
Dial
Backspace
1
.
4161234567
2. 4299
More
Cancel
L1 John Doe
Dial
1
.
4161234567
2. 4299
More
Cancel