AASTRA DT292 for BusinessPhone User Guide EN - Manual (Page 11)

11 BusinessPhone – Cordless phone DT292
Important
PIN code
Your phone is initially provided with a pre-set PIN code (Personal
Identification Number). You should change this PIN code to a
personal PIN code to prevent misuse.
To change the PIN code
Route: Settings » PhoneLock » ChangePIN
ChangePIN Select
Press
EnterOldPIN
: is displayed. z
Enter the current PIN code (default 0000) and press
Either
EnterNewPIN:
or
Wrong PIN
is displayed. In the latter
case, you have entered a number that does not match the current
PIN code. z
Enter the four digits of the new PIN code and press
RepeatNewPIN
is displayed. z
Enter the new PIN code again and press
Either
New PIN accepted
or
Wrong New PIN
is displayed.
Note the new PIN code for future use
If you enter an incorrect new PIN code three times in a row, your
phone leaves this menu option.
In other situations, if you enter an incorrect PIN code three times in
a row, your phone is blocked and
PIN Blocked, Unblock?
is
displayed. See section “ IPEI code ” on page 12 to un-block your
phone.