AASTRA DT292 for BusinessPhone User Guide EN - Manual (Page 38)

Call Forwarding
BusinessPhone – Cordless phone DT292 38
Program and activate a new external diversion address
To set a new individual external diversion address: *22*
Press 0 Z
Enter the digit(s) for external line access and enter the new
external diversion address
A maximum of 24 digits.
Note: If your public network requires waiting for a second
dial tone, press
*
.
Which digit to press for external line access depends on the
configuration of the system. #
Press
Verification tone.
Wait for the call icon to stop flashing
Press to finish the procedure
Note: Individual External Diversion can also be used via the
DISA function, see section “ Other Useful Facilities ” on
page 63 .
Cancel External Diversion #22#
Press
Wait for the call icon to stop flashing
Press to finish the procedure
Note: The programmed diversion address is not removed
from the memory, the Diversion is just inactive.