AASTRA DT292 for BusinessPhone User Guide EN User Manual
Page 99
Advertising
99
DT292
Installation
Connect the adapter to the charger and connect it to the
mains outlet as shown in the figure below.
Notes:
Place the DT292 in the charger and charge it for at least 4
hours before using it the first time.
Make sure the local mains voltage corresponds to the
voltage on the charger.
Only use the charger that comes with the Cordless phone.
Do not connect the phone to the charger without a battery.
Place the Cordless phone in the charger to charge the
battery.
Complete charging before you subscribe or use the Cordless
phone. The green light of the charger is turned off when charging is
completed. For more information about charging the battery, see
section “
Advertising