AASTRA Re-direction Services (RCS) User Guide EN - Manual (Page 18)

Using Basic RCS Features
14
41-001302-01 Rev 00 – 06.2010
7. Click . The following dialog box displays.
8. In the File to Upload field, enter the file name (<filename>.csv) of the text file you just created in step 2 (or click
<Browse> to find the <filename>.csv file on your PC desktop).
9. In the Server field, select the configuration server for which the RCS redirects these phones to for retrieving their
configuration.
10. (optional) In the Branding field, select the Branding file you want to load to these phones.
11. (optional) In the Firmware field, select the firmware you want the RCS to apply to the phone(s) you are adding.
Notes:
1.This field allows the user to specify a firmware image that is loaded onto the phone by the RCS. If, for example,
you want to deploy the phones with the 2.4.0 firmware, you can select “2.4.0” from the list in the Firmware field.
If you select a later version of firmware to install then what is currently on the phone, the RCS automatically
upgrades the phone(s) to the firmware you select. The RCS performs the upgrade before the phone redirects to
the configuration server.
2.The RCS stores the firmware images which are supplied by Aastra Telecom. The Firmware field includes only offi-
cial supported releases beginning at Release 2.4.0.
3.If you do not want the RCS to provide firmware, select “None”.
12. Click to add the phone(s) and redirect it to the specified configuration server simultaneously.