Assigning branding sets to phones, Assigning phone branding, Aastra ip phone brandings – AASTRA Re-direction Services (RCS) User Guide EN User Manual
Page 46
Aastra IP Phone Brandings
42
41-001302-01 Rev 00 – 06.2010
Assigning Branding Sets to Phones
Once a set of branding files has been named and uploaded to the RCS, this branding set can be assigned to phones for
use. Any phone booting up and contacting the RCS compares the branding files in local memory to the branding files
selected on the server. Any differences result in the Aastra IP Phone downloading the set of branding files.
Assigning Phone Branding
To assign a branding set to a phone or group of phones on the RCS, do the following:
1.
Login to an account on the RCS. (See
for more information.)
2.
Click Phones on the left menu. The Phones page opens.
3.
Click the check boxes beside the MAC address or addresses you want to assign to an existing branding set. To
quickly check all boxes, click the top checkbox beside the word MAC.
Note: All phone settings are overwritten in this step, so ensure you select phones with the same firmware version
and redirection server setting as well as branding set.