AASTRA Re-direction Services (RCS) User Guide EN - Manual (Page 34)

Aastra IP Phones and the RCS
30
41-001302-01 Rev 00 – 06.2010
4. Click . The Edit Properties dialog displays.
5. In the Server field, select the RCS for the phones to use.
6. (optional) In the Branding field, select the Branding file you want to load to this phone.
7. In the Firmware field, select the firmware you want the RCS to apply to these phones.
Notes:
1. This field allows the user to specify a firmware image that is loaded onto the phone by the RCS. If, for example,
you want to deploy the phones with the 2.4.0 firmware, you can select “2.4.0” from the list in the Firmware field.
If you select a later version of firmware to install then what is currently on the phone, the RCS automatically
upgrades the phone(s) to the firmware you select. The RCS performs the upgrade before the phone redirects to
the configuration server.
2.The RCS stores the firmware images which are supplied by Aastra Telecom. The Firmware field includes only offi-
cial supported releases beginning at Release 2.4.0.
3.If you do not want the RCS to provide firmware, select “None”.