AASTRA 4222 Office for BusinessPhone User Guide EN - Manual (Page 48)

Call Forwarding
BusinessPhone – Dialog 4222 Office / Dialog 3211 & 3212 48
Program and activate a new External Diversion address
To set a new Individual External Diversion address: *22*
Press.
0 z
Enter the digit(s) for external line access and the new
External Diversion address.
A maximum of 24 digits.
Note: Which digit to press for external line access depends
on the configuration of the system.
Note: If your public network requires waiting for a second
dial tone, press
*
. #
Press to activate the Individual Diversion.
Verification tone. í
Press to finish the procedure.
Note: Before you leave, call your extension to check if the
External Diversion has been set up correctly. This way you
can make sure that the number has been programmed
properly and that your calls will not be diverted to another
person by mistake.
Cancel External Diversion #22#
Press.
í
Press.
Note: The programmed diversion address is not removed
from the memory, the diversion is just inactive.
Re-activate External Diversion
Divert your calls to an external position. *22*#
Press to activate the programmed External Diversion.
You can make outgoing calls as usual. A special dial tone reminds
you that Call Forwarding is active. The display shows that you have
activated an External Diversion. í
Press.