AASTRA MX-ONE_A700_MS Lync 2010 Quick Setup Guide - Manual (Page 10)

10 (19)
• Publish the topology
Figure 6 - Publish topology
Define a Dial Plan
The Dial Plan configuration is required to allow Lync users to dial to MX-ONE terminals as well as
PSTN. To define it, execute the following:
• Open the Lync Server Control Panel
• Click Voice Routing and choose Dial Plan
• Define Normalization rules that fits your organization needs, at least a rule for Lync users
to dial to MX-ONE terminals and another for PSTN (assuming that MX-ONE is connected
with the PSTN) is required. Please contact Microsoft for the appropriate setup for your
company as needed
Figure 7 - New Normalization Rule, five digits example
• Commit the changes