AASTRA MX-ONE_A700_MS Lync 2010 Quick Setup Guide - Manual (Page 3)

3 (19)
1 Introduction
Aastra MX-ONE and Aastra 700 communications systems running Telephony Server software V.4.1
SP3 or later can be integrated with Microsoft Lync Server 2010 via Direct SIP integration. As Aastra
MX-ONE and Aastra 700 run the same software, in the next chapters only Aastra MX-ONE is referred
to. However, if there are differences between them it will be mentioned in this guide.
Aastra MX-ONE is a complete IP-based communications system with unparalleled capabilities for
mobile users. Not only does Aastra MX-ONE provide excellent voice communications, it also provides
the applications necessary to offer true mobility and Unified Communications (UC).
Aastra MX-ONE communications system is based on an open software and hardware environment,
using standard servers with a Linux SUSE operating system. Furthermore, Aastra MX-ONE
integrates with third party solutions using standards based interfaces, such as SIP and CSTA
V3/XML. This open standards approach enables Aastra to offer our customers a choice and with this
in mind we have worked together with Microsoft to ensure that Aastra MX-ONE can be integrated with
the latest Microsoft UC products. Aastra MX-ONE V.4.1 SP3 is fully certified by the Microsoft Partner
Program to ensure that customers have seamless experiences with setup, support, and use of Aastra
MX-ONE communications system with Microsoft UC software. Aastra MX-ONE integrates with
Microsoft UC solutions directly via a SIP connection to reduce the overall cost and complexity of the
combined solution.
1.1 General
Integration of Aastra MX-ONE with the Microsoft Lync Server 2010 is supported as a complementary
solution providing end user services like instant messaging, conferencing etc. Microsoft Partner
Program has certified the integration between Aastra MX-ONE communications system running
Telephony Server software V.4.1 SP3 and Microsoft Lync Server 2010 via a Direct SIP connection.
1.2 Scope of this document
The intent of this guide is to describe the basic integration between the Aastra MX-ONE and Microsoft
Lync Server 2010. The following sections describe the solution integration that has been certified
through the Microsoft Partner Program and covers only the Direct SIP integration. For a more
technical description on how these integrations are set-up and function, please refer to the relevant
CPI documentation for MX-ONE or go to the Microsoft UC product websites.
As a general rule, it is always recommended to check the latest products documentation.