7 revision history, Integration notes, References – AASTRA MX-ONE_A700_MS Lync 2010 Quick Setup Guide User Manual
Page 18: Revision history, 6 references, 7revision history
18 (19)
5 Integration
Notes
Please note that the following scenarios are currently not supported when MX-ONE is integrated with
Lync Server:
• REFER
cases:
•
OC Client transfers the inbound call to another PSTN phone after answering it when
REFER is enabled
•
Result: Originating phone does not hear ring back during the transfer, but once the
PSTN phone answers the call two way voice paths is present
•
Solution: Disable REFER
•
Outbound Call: Blind transfer to another Client
•
Result: Originating phone does not hear ring back during the transfer, but once the
PSTN phone answers the call two way voice paths is present
•
Solution: Disable REFER
•
Inbound Call: Blind Transfer to PBX user
•
Result: Originating phone does not hear ring back during the transfer, but once the
PSTN phone answers the call two way voice paths is present
•
Solution: Disable REFER
• Early Media before answer.
•
MX-ONE does not support sending DTMF as a part of early media.
6 References
Please always check the latest documentation. The links below are the ones available at the time of
this guide was written.
Aastra CPI Documentation – Aastra MX-ONE V.4.1 SP3 and Aastra 700 V.1.0.4 or later.
7
Revision History
Document Version
Comment
Date
Rev. A
First issue
2011-10-07
Rev. B
Second issue
2011-12-01