AASTRA 6757i SIP Phone for MX-ONE Quick Reference Guide EN - Manual (Page 13)

13
MX-ONE - Aastra 6737i/6757i
Aastra 6737i/6757i Quick Reference Guide
Engl
is
h
Answer an incoming
call on a SCA line
Press the SCA key that is flashing
(green fast flashing).
Make an outgoing
call from a SCA line:
Press the SCA key, enter the digits
and press Dial
Park and retrieve the
call
The member that has the active call
presses . The SCA key
flashes slowly with green light.
Any member in the group can
retieve the call by pressing the SCA
key that is flashing slowly with red
light.
Conferencing A member in the group wants to
participate in an active call. The
member presses the SCA key with
the active call indicated with red
steady light. (The feature has to be
enabled by the system
administrator).
Extra Directory Number (EDN)
The system administrator can assign one or several
extra directory numbers (lines) to your telephone. The
extra directory number is represented on a line key or a
soft key
The label at the key representing the EDN line starts or
ends with an icon.
Make a call from a
EDN line:
Press the wanted EDN line or soft
key. Enter the number, press Dial.
Answer a call to an
EDN line:
Press the EDN key that is flashing.
Shared Call Appearance Call Park Pool
You can park a call and transfer the call at a specific
directory number (also called Call Park Pool) and any
extension can pick up the call. If the call is not picked up
within a few minutes, the call will recall your extension.
Transfer the call to
the call park pool:
You have an active call. Press the
Xfer softkey to put the call on hold.
Dial the number to the call park
pool. Note the number (here called
B-number) that shows up on the
display. Press the Xfer softkey to
transfer the call.
Inform the person that shall take
the call that he/she shall pickup the
call on number (B-number).
Pick up a call that is
parked in the call
park pool
Dial the B-number that you
received from your collegue. When
you hear the busy tone press
CallPickUp to pick up the call
Intercom
The system adminstrator can initiate an intercom
connection on a softkey on your phone. When you
press the key, a call is set up towards a predefined party
and it is answered automatically.
Initiate an Intercom
call:
Press the Intercom softkey.
Answer an Intercom
call
The Intercom key is flashing, a ring
signal is heard and the call is
answered automatically.
You hear the other party in the
speaker, but the other party cannot
hear you and the mute key is lit.
You have to press the mute key
to let the other party
hear you.