8 cue points, 1 introduction, 2 how to add cue points – EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual User Manual
Page 139: Cue points, Introduction, How to add cue points, Age 125, Ntroduction, Oints
Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
125
7.8 CUE POINTS
7.8.1 I
NTRODUCTION
The cue points are reference marks that can be placed in the timecode bar
wherever needed in the edit. Their primary goal is to mark the edit with a visual
flag and, optionally, a description of the event, and therefore to ease the access
to a precise position on that edit.
They are represented by a yellow triangle with their number written in them. Each
logged event contains a timecode, a label and a description.
7.8.2 H
OW
T
O
A
DD
C
UE
P
OINTS
To create a cue point, proceed in one of the following ways:
•
Position the nowline where you want to place the cue point, press
,
followed by a number on the keypad, and then press ENTER.
•
Right-click on the timecode bar, and select Add Cue Point from the contextual
menu.
To create a cue point rapidly when an edit is being played:
Press
+