EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual - Manual (Page 152)

Issue 4.1.B Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
138
This removes frames at the beginning of the clip and adds the same number of
frames at the end.
A
CTIVATING THE
R
OLL
C
LIP
F
UNCTION
The Roll Clip button is only available when the nowline is located on a transition
common to all selected tracks, and when the clip to be rolled is selected.
When you first use the Roll Clip button, it changes the configuration of the Player
and the Recorder preview windows:
• The Player displays the first frame of the clip to be rolled.
• The Recorder displays the last frame of the clip to be rolled.
H
OW TO
R
OLL A CLIP
1. Place the nowline before the clip you want to roll and select the clip.
The Roll Clip button becomes active.
2. Click the Roll Clip button:
The first frame of the clip is loaded onto the Player.
The last frame of the clip is loaded onto the Recorder.
The counters are initialized to 0.
3. Click the Roll Clip button as many times as the number of frames you want to
roll the clip.
The upper counter specifies the number of frames the IN point of
the clip will be shifted to the left (negative value) or to the right
(positive value).
The lower counter specifies the number of frames the OUT point
of the clip will be shifted to the left (positive value) or to the right
(negative value).
4. Once the roll action has been defined, you can
o
confirm the action by clicking
o
reinitialize the operation by clicking
When you confirm the action, it is applied to the clip, the counter information
disappears.
Note
Please refer to the keyboard shortcuts reference chart appended to this
user manual for detailed assignments.