Header maker, 1 introduction, 2 header maker tab overview – EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual User Manual
Page 226: Introduction, Header maker tab overview, 12 ‘header maker
Issue 4.1.B
Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
212
12. Header Maker
12.1 INTRODUCTION
The Header Maker tab provides a tool to insert a still clip at the beginning of an
edit. This still is created automatically and is based on information defined in a
XML file. Besides this predefined information, you can also enter custom
information (like feed, location, source, audio) in the Data editing area.
A specific (editable) profile describes the way in which the still clip has to be
generated (components and positions) as well as its length in the timeline.
The Header Maker tool supports 4:3 and 16:9 edits and takes care of the video
aspect ratio.
12.2 HEADER MAKER TAB OVERVIEW
The Header Maker tab contains three main areas. They are highlighted on the
following screenshot and shortly described in the table below: