How to perform a search through filter fields, 4 using saved filters, Using saved filters – EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual User Manual
Page 49: Sing, Aved, Ilters
Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
Issue 4.1.B
35
H
OW TO
P
ERFORM A
S
EARCH THROUGH
F
ILTER
F
IELDS
To enter search values in the Filter fields, proceed as follows:
1.
Choose the columns you wish to perform a search on.
2.
Click the Show/Hide Filter button
The following Filter area is displayed:
3.
Select a criteria combination from the list:
4.
Select a filter parameter from the filter parameter list.
An entire line, corresponding to the selected filter parameter, is displayed:
5.
Enter filter criteria as explained in section ‘Search Fields Types’ on page
32.
For free text fields, press ENTER to apply the filter.
Otherwise, the results list is automatically restricted.
6.
If required, click the
button to add a filter parameter.
4.3.4 U
SING
S
AVED
F
ILTERS
Once you have defined a filter criterion, you may want to save it for later use. You
will then be able to apply the same filter with a single click.
Right-clicking in the Filter 0 tab displays a contextual menu with the following
options: