Network tab, Overview, Net name – EVS XTnano Version 11.01 - November 2012 Configuration Manual User Manual
Page 128: Network settings, Setting list, Introduction
3.5.
Network Tab
3.5.1.
Overview
Network Tab
The Network tab consists of one page in the basic and/or advanced mode in the server-
based application. The Network tab includes the settings on the Gigabit Ethernet
network, both networks used for the backup and transfer of video and audio data.
No SDTI network is available with an XTnano server. The Net name can however be
used.
Setting List
The table below presents the settings of the Network tab. It specifies whether the setting
is available:
•
in the basic or advanced display mode in the server-based and web-based interfaces
•
in the Technical Setup menu of the Remote Panel.
Setting Name
Basic
Advanced
Technical
Setup
Net Name
X
X
-
P1
P1
T3.X
IP Address
X
X
X
Subnet Mask
X
X
X
Default Gateway
X
X
X
3.5.2.
Net Name
Introduction
No SDTI network is available with an XTnano server.
The Net name can however be useful.
This field is available
•
in the Multicam Configuration window, Network tab, in the basic and advanced
display mode on page 1 in the server- and web-based interfaces.
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
118