Osd settings, Introduction, Cue number on osd – EVS XTnano Version 11.01 - November 2012 Configuration Manual User Manual
Page 156: Osd on outputs
3.9.2.
OSD Settings
Introduction
The OSD settings allow users to specify which and how the information will be displayed
on the OSD.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Operation tab, in the basic display mode on
page 1 on the server- and web-based interfaces.
•
in the Operational menu of the Remote Control Panel (1.1).
The following screenshot presents page 1 of the Network tab in the server-based
application, where the OSD settings are available, and highlights the OSD settings area:
Cue number on OSD
Description
Enables / disables the display of the cue point number on the
OSD of the output monitors when a cue point is recalled inside
a record train.
Values
Yes (default) / No
OSD on outputs
Description
Enables / disables the OSD on the play channels.
Values
Yes (default) / No
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
146