EVS XTnano Version 11.01 - November 2012 Configuration Manual - Manual (Page 162)

Mark cue point
Description Specifies how the cue point timecode will be memorized.
Values Two values are possible for this parameter:
• Live:
Memorizes cue points based on the timecode of the LIVE
input.
• Playback:
Memorizes cue points based on the timecode of the field
loaded on the main play channel.
Default value Live
Preroll
Description Preroll duration used when recalling a cue point.
Values From 0s01fr to 5s00fr.
Default value 0s05fr
Record trains OUTs
Description Specifies whether Multicam will freeze or play through when it
reaches an OUT point marked on the record train that is being
played back.
Values Two values are possible for this parameter:
• Play through:
Multicam will still countdown to the OUT point, but will
keep playing through this point.
• Freeze:
Multicam will countdown to the OUT point and will
automatically freeze:
◦ on that picture if the Post-Roll mode is disabled
◦ on that picture + the Post-Roll duration if the Post-Roll
mode is enabled.
When playing a clip, Multicam always freezes on the OUT
point (or OUT point + Post-Roll duration when Post-Roll mode
is enabled).
Default value Play through
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 152