Clip identifiers, Sony bvw settings, Lsm id – EVS XTnano Version 11.01 - November 2012 Configuration Manual User Manual
Page 140: Umid, Varid, Introduction
3.7.2.
Clip Identifiers
LSM ID
The LSM ID is a clip identifier based on the EVS video server structure.
The LSM ID is made up of 3 digits and 1 letter, for example 112B, where the digits and
letter represent the following elements in the server structure:
UmID
The UmID is an 8-bytes ID with fixed length.
VarID
The VarID is a 32-bytes ID with variable length and format.
The following VarID parameters need to be set up:
•
Length (8 bytes, 32 bytes)
•
Format (ASCII, binary)
•
Uniqueness level (local = server level, global = network level) - not relevant on this
server
•
Protocol visibility (list of Net Numbers of the servers) - not relevant on this server
3.7.3.
Sony BVW Settings
Introduction
The Sony BVW settings allow specifying the settings that will be used with the Sony
BVW75 protocol.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Protocol tab, on page 1 in the basic and
advanced display mode in the server- and web-based interfaces.
•
in the Technical menu of the Remote Control Panel (T5.X).
XTnano Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
130