EVS ENGSoft v1.5 User Guide - Manual (Page 45)

ENGSoft v1.5
This document is the exclusive property of OpenCube Technologies SAS and cannot be reproduced or distributed without prior authorization
45 / 63
Figure 77: The four audio channel configuration layout Figure 78: The eight audio channel configuration layout
The left side of an audio layout represents the ingest source, with the name of the source type displayed in the square. The
1-8 numbered buttons represent the source audio pins.
The right side of an audio layout represents the ingest destination, with the name of the destination subject type displayed
in the square. The 1-8 numbered buttons represents the destination audio pins.
The connection graph of the source pins to the destination pins is displayed in between. For example, a link connecting pin
#1 to destination pin #4 means that the source clip audio track #1 will be mapped to the destination clip audio track #4.
Figure 79: The source (XDCAM) side of the audio layout Figure 80: The destination (IPDirector) side of the audio layout
Creating an audio routing configuration
To modify a configuration, all you have to do is to drag links between the source and destination pins. This will create new
connections.