Snap button – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual
Page 36
IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
25
D
IRECT
A
CCESS
B
UTTONS TO THE
T
RAINS ON THE
S
HUTTLE
PRO
There are also direct access buttons on the ShuttlePRO controller to select trains
on a channel:
PREVIOUS TRAIN: Selects the previously selected Record train, pressing twice
moves back another selection, etc…
NEXT TRAIN: Selects the next Record train, if on the ‘cam A’ train it will move to
‘cam B’, etc…
SELECT TRAIN: Calls up on the screen a list of channels available. By moving the
jog dial you can move through the list to highlight the required train and press
Select Train again to select it and exit the menu.
S
NAP
B
UTTON
OR
OR
+
When a media is loaded on a player channel, the Snap function allows you to go
back to the last loaded record train at the timecode where the E/E mode was
exited, effectively “snapping” back to where the user left off in the record train.