How to change the speed of the on-air element, Take function in pgm/prv mode – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual
Page 73
Advertising
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – January 2011
62
H
OW TO
C
HANGE THE
S
PEED OF THE
O
N
-A
IR
E
LEMENT
To change the speed of the on-air element, proceed as follows:
1.
Press the
key.
The Set Speed window is displayed:
2.
Enter the speed value from 0 to 300%.
3.
Press OK.
The playout of the element starts if it was cued or paused. If the element
was being played out, the speed changes.
Advertising