4 modifying a playlist element, 5 how to move elements within a playlist, 6 adding elements to a playlist – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual
Page 81: How to create a playlist in the control panel, 6 ‘adding elements to a playlist
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – January 2011
70
1.7.4 M
ODIFYING A
P
LAYLIST
E
LEMENT
A playlist element can be trimmed in the same way as a clip. Refer to part 6 of the
user manual for a description on how to proceed.
1.7.5 H
OW TO
M
OVE
E
LEMENTS
W
ITHIN A
P
LAYLIST
To move elements within a playlist, you can choose to perform:
•
Cut/Copy/Paste operations in the Clip menu of the Clip-List tab in the Control
Panel as described in section ‘Cut/Copy/Paste an Element’ on page 47.
•
A drag-and-drop operation within the Clip-List of the Control Panel as
described below:
1.
Select the elements to be moved within the playlist.
For more information, see ‘Selection of Elements in a Playlist’ in section 0.
2.
Drag the selected elements to the requested location within the playlist:
During the drag-and-drop operation, the new position is represented by a
black thick line.
The elements are dropped where the black line was displayed when you release
the left button of the mouse.
Note
When you move a group within another group, only the clips of the group
are moved but the group is deleted.
When you move a group after the last clip of another group or before the
heading of another group, the group is moved with all its elements.
1.7.6 A
DDING
E
LEMENTS TO A
P
LAYLIST
Several kinds of elements can be added to a playlist, which are: clips, trains, bins,
playlists and growing clips. Depending on the element to be added, different
methods can be used to add it to the playlist:
•
by dragging the element(s) to the requested position in the playlist,
•
by using the APPEND CLIP button,
•
by sending the element to the default playlist.
Some limitations exist for the drag-and-drop operations and for the insertion of a
train. Refer to the chapter on ‘Playlist Panel’ in part 6 of the manual for more
information.
In the drag-and-drop operation, the black thick line indicates the position where
the element will be dropped.
There are nevertheless several places in IPDirector where you can select the
element(s) that you will drag into the playlist:
•
from the Loaded Media drop-down list in the Channel Media Pane in a Control
Panel.