Goto in button, Goto out button, Mark in – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual
Page 38
IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – January 2011
Issue 5.9.B
27
3. Protect OUT field: end timecode of the final guardband
4. OUT field: timecode of the OUT point
5. Duration field: time interval between the IN and OUT point, i.e. clip duration
Note
When a growing clip is loaded, the Protect OUT field and the OUT field
display --:--:--:--
G
OTO
IN
B
UTTON
OR
OR
+
The Goto IN button, active when a clip is loaded, takes the media to the IN frame
and timecode.
G
OTO
OUT
B
UTTON
OR
OR
+
The Goto OUT button, active when a clip is loaded, takes the media to the OUT
frame and timecode.
If a growing clip is loaded on a player channel and the user presses the Goto OUT
button, the system will play near “live”, i.e. at the closest position from the live.
M
ARK
IN
OR
OR
When pressing the button, you set an IN point at the timecode shown on the jog
bar of the Control Panel. The timecode of the IN point is then displayed in the IN
field.