4 opening the video display, 5 selecting the a/v board in the video display, Video display – EVS IPDirector Version 5.9 - January 2011 Part 5 User’s Manual User Manual
Page 97: Introduction, Selecting the a/v board in the video display
Issue 5.9.B
IPDirector Version 5.9 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – January 2011
86
3.2.4 O
PENING THE
V
IDEO
D
ISPLAY
To open the Video Display panel, select the corresponding icon
on
the main IPDirector toolbar.
To open the Video Display within a Control Panel or a Playlist Panel, you need to
assign the player channel linked to the A/V board to the corresponding panel.
Then, you can hide or unhide the Video Display by right-clicking the panel and
selecting Show/Hide Video Display.
3.2.5 S
ELECTING THE
A/V
B
OARD IN THE
V
IDEO
D
ISPLAY
When you open the Video Display module, you need to select the A/V board to be
able to view the channel associated to the board.
To do so, proceed as follows:
1.
Right-click the Video Display window.
A contextual menu is displayed with the names of the A/V board(s)
connected to the IPDirector workstation.
2.
Select EVS AVH.
The media loaded on the player channel linked to the A/V board will be displayed
in the Video Display window.