Philips HR7771 - Manual (Page 7)

from the bowl or blender jar, when you empty the bowl or jar and
when you clean them. Their cutting edges are very sharp.
Caution
- Never switch off the appliance by turning the blender jar, the bowl or
their lids. Always switch off the appliance by turning the speed
selector to 0.
- Switch off the appliance before you detach any accessory.
- Unplug the appliance immediately after use.
- Always unplug the appliance before you reach into the blender jar
with your fingers or an object (e.g. a spatula).
- Wait until moving parts stop running before you remove the lid of
the bowl or jar.
- Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
- Do not exceed the maximum level indication on the jar and the bowl.
- Consult the table in this user manual for the correct quantities and
processing times.
- Certain ingredients may cause discolourations on the surface of the
parts. This does not have a negative effect on the parts. The
discolourations usually disappear after some time.
- Never fill the blender jar or food processor bowl with ingredients
hotter than 80ºC.
- This appliance is intended for household use only.
- Noise level: Lc = 87.5 dB(A).
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
safety features
thermal safety cut-out
This appliance is equipped with a thermal safety cut-out that automatically
cuts off the power supply to the appliance in case of overheating.
If the appliance stops running:
1 Remove the mains plug from the wall socket.
2 Let the appliance cool down for 1 hour.
3 Put the mains plug back into the wall socket.
4 Switch on the appliance again.
Please contact your Philips dealer or an authorised Philips service centre
if the thermal safety cut-out activates too often.
Built-in safety lock
This feature ensures that you can only switch on the appliance if you
have assembled the blender jar or the bowl correctly on the motor unit
and the lid correctly on the blender jar or bowl. If the blender jar or bowl
and its lid are assembled correctly (see chapter ‘Using the appliance’), the
built-in safety lock will be unlocked.
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter ‘Cleaning’).
using the appliance
general
- The appliance is equipped with a built-in safety lock that prevents it
from functioning if the blender or food processor is not assembled
properly.
EnglisH 7