Hotchkis 80113 1967-1972 Dodge A-Body Total Vehicle System - Manual (Page 31)

5R
Shift the bar side to side, and fore & aft in order to evenly align frame brackets, and so that the dog bones are
vertical when attached to middle hole in sway bar.
6R
Clean and prep surface, and tack weld frame brackets to frame rails.
7R
Verify that brackets are aligned correctly, if not, make necessary adjustments at this time. Remove dog bones
from frame brackets, and completely weld in frame brackets. Let cool, and paint surface to prevent rust.
8R Grease all bushings with supplied urethane specific grease, re-install sway bar bushings, brackets, and dog
bones. Evenly align sway bar so that dog bones are vertical, and completely tighten all hardware.