Hotchkis 80113 1967-1972 Dodge A-Body Total Vehicle System User Manual
Page 26
3F
Attach sway bar end-links to the bar, LCA brackets, lift front of sway bar towards the frame, and support. (radiator
support brace may need to be removed for clearance.) Verify that the end-links are vertical , and that the span
between the end-link brackets match the width of the sway bar. (Uneven distance may be caused by worn, or
damaged lower control arm bushings.) If modifications, adjustments, or repairs need to be made, perform them at
this time before continuing with the installation. Replacement lower control arm bushings are available from
Hotchkis (part #21366).
4F
With end links attached, loosely install the sway bar bushings, brackets, and frame mounts to the inboard side of
the sway bar centering rings. Lift sway bar, and position brackets and frame mounts evenly side to side, as well
as fore & aft, to keep end links vertical. Clean and prep the surface of frame, and tack weld into position. See
following steps.