Hotchkis 2253 Sway Bars, Set, 65-66 GM B-Body, Sport - Manual

2253 FRONT AND REAR SPORT SWAY BAR SET
65-66 CHEVROLET B-BODY
Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
Performance products. Visit us online @ www.hotchkis.net
This installation will require drilling new mounting holes for both the front and rear
sway bars. Please read instructions carefully to avoid unnecessary drilling.
INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR
1) Securely block the rear wheels of the vehicle. Use a jack to raise the vehicle and support with
jack stands only if you need additional clearance under the vehicle. You will have to lower the
vehicle onto its wheels in a later step to remove and install the front sway bar.
2) Unbolt the stock sway bar bushing brackets. Remove the bushings once the brackets are loose.
Unbolt and remove the end links from each end of the bar. The bar should now be free moving
and is held in the vehicle only by the two holes in the frame. Retain the stock bushing retainer
bolts. You may discard the end links, as they will not be re-used.