Hotchkis 25407 WRX Competition End Link Set User Manual
2002-up subaru wrx, Installation of hotchkis front endlinks
25407 COMPETITION ENDLINK KIT
2002-UP SUBARU WRX
Thank you for your purchase from our line of Subaru WRX parts. Please call us at (877) 4NO-ROLL if you have any
questions regarding the service or installation of your Hotchkis products.
Special Note: Our new & improved end links are now maintenance free. So there are no grease fittings
needed. Pictures in this manual shows the previous design with grease fittings.
INSTALLATION OF HOTCHKIS FRONT ENDLINKS
(Step 1) Remove the stock end links from the vehicle. Install your new Hotchkis end links in the same manner as the
picture below. Don’t forget to place the provided washer before each nylock nut. The jam nut installed on your end
links should be loose during installation. This will allow you to position the ball joint studs correctly.
(Step 2) Use a 9/16” wrench and a 3/16” allen wrench to tighten the nylock nuts for each stud. (
Tip: If
possible, try using a “ratcheting wrench” to speed up the process.)
Document Outline
- INSTALLATION OF HOTCHKIS FRONT ENDLINKS
- INSTALLATION OF HOTCHKIS REAR ENDLINKS
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?